Setting up your watch
When you turn on the watch for the first time or reset it, follow the steps below to pair it to your system. Before you begin, make sure the units are close to each other.
Pairing your watch
1. Start the bridge
Unpack the bridge and remove the battery pull tab to start it. The top LED will begin to breath in blue.
2. Charge your watch
Unpack your watch and place it in the charger for 15 min. Press any button to wake up the display, select your language and your watch is ready for pairing.
3. Pair your watch
Hold down the bridge top test button marked until the LEDs start to blink alternately. Your watch will let you know when it has been added to the system. Tap OK.
4. Showing the current time
If you are using the Assistant app, the system time is shown. Tap Edit to fine tune the time manually or tap Done
to complete the installation.
Setting the time manually
If you are not using the Assistant app, you will be asked to set the time and date manually.
1. Select time format
Select between 12-hour and 24-hour time format and tap Next to set the time.
2. Set the time
Select the hours or minutes and tap the red arrows to adjust the time. Tap Next to set the year.
3. Set the year
Tap the red arrows to set the year and tap Next to set the date.
4. Set the date
Select the month or day and tap the red arrows to set the date. Tap Next to complete the installation.
