Datasheet

Read the in-depth technical information.

Wrist Receiver and Charger

The Visit Wrist Receiver 
Art. no. BE1560

Technical information

Power supply

Mains power:

Via Bellman Visit Wrist Receiver Charger, BE1570. 

Battery power

1 x 1.2 V VARTA V40H rechargeable NiMH battery.

Operating time:

Approximately 30 hours

Charging time:

Approximately 8 hours.

If the battery is completely flat, you can still use the Wrist Receiver by placing it in the Charger. The Wrist Receiver needs to be charged for about two hours before it can be used separately.

Power consumption:

Active: 100 mA
Idle position: 3 mA

Radio function

Radio frequency:

868,3MHz

Number of Radio Keys: 

64 Radio Keys as standard. Special software can be used to increase these to 256 Radio Keys in increments of 64 per software purchase. Contact the nearest supplier for further information.

Coverage:

The normal coverage between a transmitter and Visit Wrist Receiver is approximately 100 metres with a clear line of sight. Coverage is reduced if walls and large objects screen off the signal. Any thick walls constructed of reinforced concrete will greatly affect coverage. The system may also be affected by radio transmitters such as TV transmitters, computers, mobile phones, etc. This means that a unit may work perfectly in one part of the room but not at all in another.

Activation

Radio:

Bellman Visit 868 system.

Output signals

Vibrator power:

Built-in

Additional information

For indoor use only

Dimensions WxHxD:

38 x 12 x 49 mm

Weight:

With battery: 27 g
Without battery: 25 g

Colour:

White with black top part and grey Function Button.

Accessories

Bellman Visit Wrist Receiver Charger, BE1570.
Bellman Bed-shaker, BE1270 (connected to BE1570).
Bellman Wrist Belt Tool, BE9140.

The Visit Charger
Art. no. BE1570

Power supply

Mains power:

7.5 V DC/1500 mA with power supply unit 
BE9201 (Europe) or
BE9202 (United Kingdom). 

Battery power

4 x 1.2 V/600 mA NiMH TMK AAA60CT rechargeable batteries.

Charging:

Via the power supply unit.
Discharged back-up batteries will take at least 24 hours to charge. The BE1570 should normally be permanently connected to mains power.

Power consumption:

Active: 650 mA
Idle position: 70 mA

Radio function

No radio function, see BE1560.

Activation

Via BE1560

Output signals

Vibrator power:

2.0 - 4.0 VDC

Additional information

For indoor use only

Dimensions WxHxD:

95 x 100 x 117 mm

Weight:

With battery: 185 g
Without battery: 135 g

Colour:

White

Cable length:

1,7 m

Accessories

Bellman Bed-shaker, BE1270.
Bellman External Trigger Cable, BE9086.

RESOURCES
MANUAL APPENDIX (EN)