Dataheet BE1540

Read the in-depth technical information for
Portable Flash Receiver

Portable Flash Receiver

The Visit Portable Flash Receiver
Art. no. BE1540 

Technical information

Power supply

Mains power:

7.5 V DC / 1500 mA with power supply unit 
BE9216 (Europe) or
BE9217 (United Kingdom). 

Battery power:

4 x TMK C400T NiMh batteries.

Power consumption:

Active: 1500 mA
Idle position: 15 mA

Radio function

Radio frequency:


Number of Radio Keys: 

64 Radio Keys as standard. Special software can be used to increase these to 256 Radio Keys in increments of 64 per software purchase. Contact the nearest supplier for further information.


The normal coverage between a transmitter and receiver in the Bellman Visit 868 System is approximately 200 metres with a clear line of sight. Coverage is reduced if walls and large objects screen off the signals. Any thick walls constructed of reinforced concrete will greatly affect coverage. The system may also be affected by radio transmitters such as TV transmitters, computers, mobile phones, etc. This means that a unit may work perfectly in one part of the room but not at all in another.



Bellman Visit 868 system.

External trigger:

2.5 mm stereo (mono provides a connection) jack plug.


Between the inner and outer pins of the mono type 2.5 mm jack plug or between the middle/inner and outer pins of the stereo type 2.5 mm jack plug, see diagram.


2 to 30 V between the inner pin and middle pin on the stereo type 2.5 mm jack plug, see diagram.


3 to 24 V RMS 5 -150 Hz between the inner pin and middle pin on the stereo type 2.5 mm jack plug, see diagram.

jack plugs

Output signals

Built-in flashsignal: 

15 candela.
Warning! Flashes can cause epileptic attacks.

Vibrator power:

2 - 4 VDC

Additional information

For indoor use only

Dimensions WxHxD:

95 x 80 x 95 mm


With battery: 560 g
Without battery: 250 g




Bellman Bed Shaker BE1270
Bellman External Trigger Cable BE9220